VideoLogic SmartTools for Windows 95 
====================================
& GrafixStar 400
================

ReadMe version 1.0
18th December 1995


This ReadMe file contains late-breaking information and user tips on 
VideoLogic's SmartTools for Microsoft Windows 95.

SmartTools is a new set of applications designed to allow you to get the 
most out of the powerful capabilities of your GrafixStar graphics card. 
SmartTools gives you more control over the appearance and behaviour of your 
Windows desktop.

Contents
========
1. An overview of SmartTools
2. Installation / Deinstallation
3. Troubleshooting
4. GrafixStar Drivers


1. An overview of SmartTools
============================
1.1.  SmartTools
================
SmartTools lets you create toolbars to give you more control and quicker 
access to your Windows applications and documents.

With SmartTools you can :

    -	Use toolbars for other Smart applications, and customize these toolbars 
      to suit your needs.

    -	Create toolbars for other applications, adding buttons for the 
      programs, documents and files you use most.

    -	Assign hotkeys for commands that you use most often.

1.2.  SmartDisplay
==================
SmartDisplay makes it easier and quicker for you to set up the display 
properties for your monitor.

SmartDisplay gives you :

    -	A SmartDisplay Wizard, which guides you through a step by step 
      procedure that helps you find the ideal display properties for the 
      kind of user you are and the kind of work you are doing.

    -	A SmartDisplay set up procedure for advanced users, which allows you 
      to select the display size, color palette, refresh rate, desktop size, 
      connectivity, monitor alignment and properties for your display.

1.3.  SmartDesktop
==================
SmartDesktop is an application which controls the appearance and behaviour 
of your desktop.

With SmartDesktop you can :

    -	Use a virtual desktop, where the desktop size is larger than the 
      display size. SmartDesktop controls the way you move around the 
      desktop and reach the off-screen portion of you desktop.

    -	Change the display size at the touch of a button, allowing you to zoom 
      in and zoom out while you are working.


2. Installation / Deinstallation
================================
SmartTools comes on two disks with Disk 1 incorporating the latest 
Windows 95 graphics drivers for the GrafixStar range in addition to the 
SmartTools SetUp files.

	Disk 1 :-  SmartTools and GrafixStar 300/400/500/700 Drivers
	Disk 2 :-  Disk 2 of the SmartTools installer

Before installing SmartTools, you must install the latest graphics drivers 
for your GrafixStar card (As found on Disk 1 of the SmartTools install). 


2.1.  Installation
==================

2.1.1.  Installing the GrafixStar drivers
-----------------------------------------
The easiest way to install the GrafixStar Windows 95 software is using the 
Display Properties window:

   1.	Insert the CD or disk into your computer.
   2.	Open the Control Panel window. To do this, click Start, point to 
      Settings and click Control Panel.
   3.	Double click on the Display icon to open the Display Properties Window.
	Note: You can go directly to the Display Properties window by clicking 
      on the Windows 95 background with the right mouse button and choosing 
      Properties from the menu.
   4.	Choose the Settings page by clicking on the Settings tab. 
   5.	Choose the Change Display Type button.
   6.	Make sure that the Monitor Type line contains the name of your monitor. 
      If not, click the Change button and select the name of your monitor 
      from the list.
   7.	Click on the Change button for the Adapter Type.
   8.	Insert the GrafixStar CD or the SmartTools for Windows 95 disk 1 into 
      your computer and choose Have Disk from the Select Device menu. (If 
      you are using the CD, you will have to browse to the folder 
      d:\GrafixStar\win95\disk 1).
   9.	Select your GrafixStar card from the list and choose OK.
  10.	When the GrafixStar files have been copied to your PC, the Change 
      Display Type window is displayed again. Choose Close.
  11.	A message appears telling you that you will have to restart Windows 95 
      for the new display type to take effect. Choose OK.
  12.	Windows 95 restarts with the new GrafixStar Windows 95 drivers. 

If the GrafixStar drivers have installed correctly you will find an 
additional page within the Display Properties Window entitled 'Advanced'.

You are now ready to install the Smart Tools for Windows 95.  


2.1.2.  Installing the SmartTools
---------------------------------
   1.	Choose Run from the Start menu.
   2.	If you are using floppy disks, insert the SmartTools for Windows 95 
      disk 1 back into your computer, choose Browse and change to a:.
   3.	Type setup and choose OK.
   4.	Follow the instructions that appear on the screen.

When SmartTools is installed, the Advanced page within the Display 
Properties Window is replaced by two new pages entitled 'SmartDisplay' 
and 'SmartDesktop'.


2.2.  DeInstalling the SmartTools
=================================
To deinstall the SmartTools from your system, re-run the SmartTools SetUp 
from the VideoLogic SmartTools program group and select Remove.

Note that removing SmartTools involves restarting Windows 95, so you should 
first save any open documents that you may have.

Once the SmartTools have been deinstalled, you will have to reinstall the 
GrafixStar drivers in order for the Advanced page to reappear within the 
Display Properties Window.

3. Troubleshooting
==================

3.1.  Modes
===========
3.1.1.  16 Color modes
----------------------
SmartTools is not designed to work with a 16 color palette (4 bits per pixel). 
The modes 640x480x16 and 800x600x16 cannot be accessed using SmartTools. If 
you wish to use these modes, SmartTools must not be installed. However, you 
can access 1280x1024x16 using SmartTools.

3.1.2.  Monitors
----------------
Windows 95 does not restrict the generic SVGA monitor settings to a given 
set of display sizes, so SmartTools allows any display size to be selected. 
Therefore if you have 'Standard monitor types' selected as you monitor, 
SmartTools will not restrict your display size. There is therefore a 
possibility that you could zoom out to a display size that your monitor does 
not support.

3.2.  Toolbars
==============
3.2.1.  Disappearing Toolbars
-----------------------------
When using SmartDesktop to zoom into the desktop, it is possible from time 
to time to lose sight of the SmartTools toolbars. You can relocate a toolbar 
within your current viewport using the 'Find Now' feature. To reach the 
'Find Now' button, select the Properties button of the toolbar on the 
Toolbar Properties page of SmartTools.

3.2.2.  Maximize in Display
---------------------------
The SmartDesktop feature 'Maximize on Display' maximizes your applications 
to the full size of your viewport. This feature ignores the Windows 95 
Taskbar, so part of your application window disappears below it. Therefore, 
It is recommended that the Taskbar is set to 'auto-hide'.

3.2.3.  Moving & Deleting Buttons from Toolbars
-----------------------------------------------
You can have buttons on the toolbars simply by dragging them with the mouse 
to the desired location while holding down the shift key. If you drag a 
button off the toolbar while holding down the shift key, the button is 
removed from the toolbar.

3.3.  HotKeys
=============
3.3.1.  DOSBox
--------------
The SmartDesktop hotkeys will not function when a DOSBox is open and its 
window currently has the focus.

3.4.  Mouse Cursor Schemes
==========================
3.4.1.  Panning around the Desktop
----------------------------------
The cursor schemes 'animated hourglasses' and 'none' may cause a jerky effect 
when panning around a virtual desktop, or may even prevent you from panning. 
To remedy this, choose another cursor scheme.

N.B. The cursor scheme 'None' behaves differently than 'Windows Standard', 
which does not cause any known problems.

3.5.  Connectivity - Feature Connector
======================================
3.5.1  Feature Connector
------------------------
If you select 'Feature Connector' from the Connectivity page of SmartDisplay, 
your CONFIG.SYS file is modified to include the TSR VLENABLE.SYS. VLENABLE 
is a small utility that enables DAC snooping at start up. 

However, it may be possible that your system does not have a CONFIG.SYS file, 
or it has one that is zero bytes in size. In those cases, you must create a 
file called CONFIG.SYS at the root of your hard disk and make sure that it 
contains some data (a 'rem' line is sufficient), before you select 
'Feature Connector'. 

When you have selected Feature Connector you must restart your system in 
order for VLENABLE to run.

If you uncheck the Feature Connector option, the VLENABLE.SYS line in the 
CONFIG.SYS file will be disabled by changing it to a 'rem' line.





4. The GrafixStar 400 Drivers
=============================

For information on installing the drivers see section 2.1

Contents
========
4.1. Display modes with video acceleration
4.2. Using games with Direct Draw
4.3. Troubleshooting

4.1. Display modes with video acceleration
==========================================
The modes below support video acceleration:

Display size  Colors	Refresh rate (Hz)		      Memory required

640x480	  256		60, 72, 75, 85			1 MB
640x480	  65,536	60, 72, 75, 85			1 MB
800x600	  256		56, 60, 72, 75, 85		1 MB
800x600	  65,536	56, 60, 72, 75, 85		2 MB
1024x768	  256		43i, 60, 70, 72, 75, 80, 85	1 MB
1024x768	  65,536	43i, 60, 70, 72, 75		2 MB

All other modes display AVI files using software only, which gives poorer 
quality playback. If you want to playback MPEG files without special 
hardware, you can obtain a FREE copy of Xing MPEG Player when you return 
your GrafixStar 400 registration card.

4.2. Using games with Direct Draw
=================================
GrafixStar 400 display drivers for Windows 95 are compatible with Direct 
Draw. Some games are supplied with a copy of DirectX, which will overinstall 
our drivers. After installing these games, you must re-install our drivers 
in order to regain access to all of our drivers functionality. If you do not 
re-install these drivers, you do not get the improved graphics performance 
and features provided by VideoLogic.  To tell whether the VideoLogic drivers 
are currently installed or not, bring  up the Display Properties page; if 
the Advanced tab or the SmartDesktop/SmartDisplay tabs are available, then 
the GrafixStar 400 drivers are installed. Refer to the GrafixStar 400 User 
Guide for information on installing the GrafixStar 400 software.

4.3. Troubleshooting
====================
Flying Windows Screensaver
--------------------------
If you are using the Flying Windows screensaver, you may see horizontal 
lines appear while the screensaver is active. Choose another screensaver if 
desired.

Playing back AVI files
----------------------
If you have centered your screen to the extreme left or extreme right using 
the screen centering application, you may find that when playing back AVI 
clips, the screen becomes all one color and the PC hangs. To remedy this, 
center the screen just slightly away from the extreme left or extreme right. 
This problem does not occur if you use your monitor's controls to center the 
screen.